Steps 1 & 2
Right Click (control-click on a Mac) on the two images to the left to save them to your computer. Print them out at 100% size (no scaling) on a heavy paper, such as card stock.
Steps 3 & 4
Using a ruler as a guide, take the rounded end of a paper clip (or a ballpoint pen that has run out of ink) and press along the dotted lines of the pop-up piece and card. Go all the way from the top to the bottom of the card!
Steps 5 & 6
Carefully cut out the pop-up piece and card for the ark following the solid, black lines.
Step 7
Flip the pop-up piece over (so the dotted lines no longer show) and color using markers or crayons. You need to color the pop-up now because you won’t be able to once it is attached to the card.
Step 8
After you are finished coloring, flip the pop-up over so you can see the dotted lines. Fold the tab on the side of the ark’s roof and crease with your finger.
Step 9
Continuing in the same direction, fold the roof of the ark in half and crease with your finger.
Step 10
This is how the ark’s roof should now look. It peaks up in the center the way a roof should!
Step 11
Open the roof back up and return all the folds to their original positions. Fold the small tab shown inwards and crease with your finger. Return the tab to its original position.
Step 12
Moving to the opposite end of the ark, fold over and crease along the dotted line right next to the giraffe. Open this piece back up again to its original position.
Step 13
Starting at the far end near the bird, fold the end piece of the ark inwards and crease with your finger.
Step 14
Continuing in the same direction, fold over the end of the ark and crease.
Step 15
Continuing in the same direction, fold over the next piece of the ark with elephant on it and crease.
Step 16
Continuing in the same direction, fold over the final piece of the ark and crease.
Step 17
Fold back one of the tabs (shaped like water waves!) at the bottom of the ark and crease.
Step 18
Flip the pop-up over and fold back the other tab shaped like water and crease.
Step 19
Open the pop so you can see all the dotted lines. Put a small amount of glue in the area below the elephant’s head marked “Glue here.”
Step 20
Pick up the pop and bring the tab (on the side with the giraffe) towards the glue area.
Step 21
Lay the pop down and press the tab into the glue.
Step 22
Put a small amount of glue on the remaining area marked "Glue here."
Step 23
Fold that piece over onto the remaining tab on the ark and press the glue. Let dry!
Step 24
Fold the card in half along the dotted line and crease. Open the card.
Step 25
Put a small amount of glue on the area marked "Glue here" on the RIGHT SIDE only.
Step 26
Pick up the pop (with the bird at the top) and fold the RIGHT water tab backwards so it matches the position of the glue area. Look carefully at this picture and the picture in Step 27 so you’ll understand how to attach the pop to the glue area. Press the tab into the glue area.
Step 27
Flip the pop-up over and fold back the other tab shaped like water and crease.
Step 28
Put a small amount of glue on the remaining area marked "Glue here."
Step 29
Making sure the pop is laying completely flat against the card, begin to fold the card closed.
Step 30
Close the card completely. Press on the card to make sure the glue area on the inside is adhering to the tab. LET DRY! Don’t open the card right away or the pop-up will come unglued!
Step 31
Your pop-up ark is finished! Happy sailing!