Frankenstein Monster Pieces - PDF

Frankenstein Monster - PDF

Steps 1 & 2:
Right click (or control click on a Mac) on the two links above to download the PDFs. Print out all the frankenstein's monster pieces and card on heavy paper, like card stock or construction paper.

If Adobe Acrobat Reader is installed on your computer, the file should open. If you don't have Acrobat Reader, you can download it here.

Step 3:
Using a ruler as a guide, take the rounded end of a paper clip (or ballpoint pen that has run out of ink) and press along the dotted lines of the pop-up pieces and card.

Step 4:
Carefully cut out the pop-up pieces and card following the solid, black lines around the OUTSIDE of the shapes ONLY.

Step 5:
Take your card, fold it in half and then open it. Set it aside.

Step 6:
Take the body piece and fold it in half and then open it.

Step 7:
Fold the bottom left edge of the coat up to the right arm and return it.

Step 8:
Now fold the bottom right edge of the coat up to the left arm and return it.

Step 9:
Hold the left arm in one hand and the left pocket in the other and bend towards you at the dotted line.

Step 10:
Hold the left shoulder in one hand and the chest in the other and bend towards you at the dotted line.

Step 11:
Hold the right arm in one hand and the right pocket in the other and bend towards you at the dotted line.

Step 12:
Hold the right shoulder in one hand and the chest in the other and bend towards you at the dotted line.

Step 13:
Press the left shoulder to the chest and hold while you fold the left edge of the coat up to the right arm and then return them to the original position.

Step 14:
Press the right shoulder to the chest and hold while you fold the right edge of the coat up to the left arm and then return them to the original position.

Step 15:
Set the body piece aside. Pick up the monster's head and fold it in half and then open it.

Step 16:
Fold the left bolt towards the face along the dotted line.

Step 17:
Fold the right bolt towards the face along the dotted line.

Step 18:
Pick up the card with the legs on it. Place a small amount of glue on the grey areas marked "glue here."

Step 19:
Align the pockets of the body piece over the matching grey areas. Make sure that the line down the middle matches the line in the card. Press firmly and be sure let the glue dry.

Step 20:
Place a small amount of glue on the grey areas marked "glue here" on the shoulders.

Step 21:
Align the bolts of the head over the matching grey areas. Make sure that the line down the middle of the head matches the line in the body. Press firmly and be sure let the glue dry.

Step 22:
Now carefully close your card and press firmly.

Step 23:
Open the card and watch Frankenstein's monster rise up and give you a big Halloween hug!